FreeLix show

show

Mostra sezioni della struttura MCS

show running-config

---

ambito di utilizzo	In 'enabled mode
sintassi	Scandisce l'albero di memoria che costituisce la struttura di MCS.

---

esempi liscoUno0# sh running-config /tmp/mcs.dump.1957849

:MCS init

:LisCO process

 0:2649 (ces) (null)          start 1140234774
 1:1957 (mcs) (null)          start 1140234769
 2:870 (cli) (null)          start 1140281546 refer to 869
 3:869 (cei) -               start 1140281546 refer to 870
 4:2596 (cli) (null)          start 1140392153 refer to 2595
 5:2595 (cei) -               start 1140392153 refer to 2596
 6:8319 (cli) (null)          start 1140283352 refer to 8318
 7:8318 (cei) -               start 1140283352 refer to 8319

:enable password

 8:enable password LLrT4kLLWpgMs encrypted

:interface

 9:interface ethernet0 100full
10:interface ethernet1 10half
11:interface ethernet2 100full

:nameif

12:nameif ethernet0 xlan security70
13:nameif ethernet1 inside security100
14:nameif ethernet2 acantho security0

:ip address

15:ip address acantho 211.104.191.205 255.255.255.240
16:ip address xlan 192.168.1.1 255.255.255.0
17:ip address inside 172.16.0.253 255.255.255.192

:route

18:route acantho 0.0.0.0 0.0.0.0 211.104.191.193

:failover ip address

19:failover ip address acantho 211.104.191.206
20:failover ip address inside 172.16.0.254

:failover poll

21:failover poll 3

:failover link

22:failover link xlan

:failover lan unit

23:failover lan unit primary

:failover lan key

24:failover lan key netsitech

:failover lan enable

25:failover lan enable

:access-list

:xlan_access_in

:access-group

:nat

:global

:static

:lix br

:lix vhost

:lix start

Vedi anche configure, enable
Torna all'indice